LAB LAB LUAM PUAB TSAIG CRUSHER

Lub hom phiaj thiab Thov teb

Our Jaw Crushers are ideally suitable for primary and secondary crushing, with well-capacity and high-efficiency, they are widely used for crushing various medium hard rocks and other ore materials whose maximum pressure-withstanding is 2000 kilogram force/cm3 and they are mainly supplied to the departments like Geological coal char、Mine、Metallurgy、Chemical Engineering、Construction Materials etc. And the labs of junior college academies science and research units.

Thawj cov kev qhia tshwj xeeb thiab cov ntaub ntawv txheej txheem

Qhov tseem ceeb ua hauj lwmtej Ntsiab Lus

The Jaw crusher structure includes Fabricated Body、Swing Jaw、Eccentric Shaft、Jaw Plates、Toggle mechanism etc parts. The electromotor drives eccentric shaft through triangle strap, to make the swing jaw moves in adjusted locus, thereby the materials in the crushing cavity are crushed.

The fabricated body is electricity welded by steel plates, the fixed jaw plates tightened by bolts are fixed in the front of steel housing, which assist in impacting the plates. The side plates are fixed in the steel housing side-wall which in the right-and-left of the crushing cavity, for preventing the wearing and tearing of the steel housing side-wall.

The swing jaw is a cast steel moulding, its face fixes swing jaw plates, top hang on the housing by eccentric shafts and roller bearings, its infrastructure is supported by toggle mechanism and it is scroll touching with the toggle mechanism. Fly wheels and Strap wheels with grooves are fixed in the two sides of the eccentric steel shafts. The steel housing is welded into the machine seat, electric motor sliding-track is fixed in the machine seat with bolts and a outlet drawer is fisted in the outlet, but it can expel products downwards directly without outlet drawer.

Toggle mechanism is connected with supporting bolts byφ9mm pins when the materials in the crushing cavity can not be crushed and the loads are increased suddenly, viz. The pin parts itself rapidly to protect other works from being destroyed. In the end of supporting bolt, there’s a hand wheel, it is used to adjust the outlet width size. The adjusting process is that remove the setscrew first, then circumgyrate the hand wheel, after adjusting, tighten the setscrew again, the connection between pothook and spring at the down most of the swing jaw make the toggle mechanism and swing jaw not to work outside, and they are adjusted by nuts.

Kev Qhia Txhim Kho

Lub tshuab siv rau cov neeg siv tom qab tau sib sau ua ke los ntawm peb lub chaw tsim khoom siv khoom siv, thov xyuas nws thaum koj tau txais, txhawm rau tshem tawm cov kev ua txhaum thaum thauj khoom.
1.Due rau Biggish ua haujlwm tshee, yog li peb tau hais kom mount lub puab tsaig crushers ntawm cov pob zeb ua kom zoo nkauj, kom muaj suab nrov, koj yuav zoo dua underlay hardwood tuam tsev, cov roj hmab strips lossis lwm yam roj hmab - Cov ntaub ntawv vibrancy ntawm cov crushers thiab cov qhus qhob foundations.
2.Qhov Foundation Qhov hnyav yog kwv yees li 5 - 10 zaug ntawm lub qhov tob tob tob dua li hauv av khov qhov tob ntawm cov chaw no.
3.Before kho qhov hluav taws xob dav dav, koj yuav tsum xoob lub zog hluav taws xob ua ntej. Thiab tom qab kho, haum kho lub caij nplooj ntoos hlav nruj heev, rau kev tiv thaiv lub toggle me ntsis los ntawm kev ua haujlwm sab nraud.

Khoom Yees Duab