Laboratorijska čeljust

Svrha i Primenjeno polje

Our Jaw Crushers are ideally suitable for primary and secondary crushing, with well-capacity and high-efficiency, they are widely used for crushing various medium hard rocks and other ore materials whose maximum pressure-withstanding is 2000 kilogram force/cm3 and they are mainly supplied to the departments like Geological coal char、Mine、Metallurgy、Chemical Engineering、Construction Materials etc. And the labs of junior college academies science and research units.

Primarne specifikacije i tehnički podaci

Glavni raditiing principijelan

The Jaw crusher structure includes Fabricated Body、Swing Jaw、Eccentric Shaft、Jaw Plates、Toggle mechanism etc parts. The electromotor drives eccentric shaft through triangle strap, to make the swing jaw moves in adjusted locus, thereby the materials in the crushing cavity are crushed.

The fabricated body is electricity welded by steel plates, the fixed jaw plates tightened by bolts are fixed in the front of steel housing, which assist in impacting the plates. The side plates are fixed in the steel housing side-wall which in the right-and-left of the crushing cavity, for preventing the wearing and tearing of the steel housing side-wall.

The swing jaw is a cast steel moulding, its face fixes swing jaw plates, top hang on the housing by eccentric shafts and roller bearings, its infrastructure is supported by toggle mechanism and it is scroll touching with the toggle mechanism. Fly wheels and Strap wheels with grooves are fixed in the two sides of the eccentric steel shafts. The steel housing is welded into the machine seat, electric motor sliding-track is fixed in the machine seat with bolts and a outlet drawer is fisted in the outlet, but it can expel products downwards directly without outlet drawer.

Toggle mechanism is connected with supporting bolts byφ9mm pins when the materials in the crushing cavity can not be crushed and the loads are increased suddenly, viz. The pin parts itself rapidly to protect other works from being destroyed. In the end of supporting bolt, there’s a hand wheel, it is used to adjust the outlet width size. The adjusting process is that remove the setscrew first, then circumgyrate the hand wheel, after adjusting, tighten the setscrew again, the connection between pothook and spring at the down most of the swing jaw make the toggle mechanism and swing jaw not to work outside, and they are adjusted by nuts.

Uputstvo za instalaciju

Mašina se isporučuje korisnicima nakon što se sastavlja cjelokupna tvornica proizvodnje, molim vas ispitajte ga kada dobijete, kako biste eliminirali moguće greške tokom transporta.
1.Due za Bighish Work Vibrancy, tako da predlažemo da montiraju čeljusti na betonskim temeljima, za smanjenje vibracija i buke, bolje biste bili u podlogu Tvrdog drveta, gumene trake - gumene trake - Životni materijali između drobilica i betonskih temelja.
2. Težina temelja je otprilike 5 - 10 puta težine stroja, dubina temelja je dublja od zemlje zamrzavanja ovog mjesta.
3. Prije podešavanje veličine širine izlaza, prvo biste trebali otpustiti napeto proljeće. I nakon podešavanja, na odgovarajući način podesite oprugu napetosti, za sprečavanje prebacivanja mehanizma izvana vani.

Video proizvod