Crusher jaw saotharlainne

Cuspóir agus Réimse feidhmeach

Our Jaw Crushers are ideally suitable for primary and secondary crushing, with well-capacity and high-efficiency, they are widely used for crushing various medium hard rocks and other ore materials whose maximum pressure-withstanding is 2000 kilogram force/cm3 and they are mainly supplied to the departments like Geological coal char、Mine、Metallurgy、Chemical Engineering、Construction Materials etc. And the labs of junior college academies science and research units.

Sonraíochtaí príomhúla agus sonraí teicniúla

Príomh- áit oibrecuir in iúl prionsabal

The Jaw crusher structure includes Fabricated Body、Swing Jaw、Eccentric Shaft、Jaw Plates、Toggle mechanism etc parts. The electromotor drives eccentric shaft through triangle strap, to make the swing jaw moves in adjusted locus, thereby the materials in the crushing cavity are crushed.

The fabricated body is electricity welded by steel plates, the fixed jaw plates tightened by bolts are fixed in the front of steel housing, which assist in impacting the plates. The side plates are fixed in the steel housing side-wall which in the right-and-left of the crushing cavity, for preventing the wearing and tearing of the steel housing side-wall.

The swing jaw is a cast steel moulding, its face fixes swing jaw plates, top hang on the housing by eccentric shafts and roller bearings, its infrastructure is supported by toggle mechanism and it is scroll touching with the toggle mechanism. Fly wheels and Strap wheels with grooves are fixed in the two sides of the eccentric steel shafts. The steel housing is welded into the machine seat, electric motor sliding-track is fixed in the machine seat with bolts and a outlet drawer is fisted in the outlet, but it can expel products downwards directly without outlet drawer.

Toggle mechanism is connected with supporting bolts byφ9mm pins when the materials in the crushing cavity can not be crushed and the loads are increased suddenly, viz. The pin parts itself rapidly to protect other works from being destroyed. In the end of supporting bolt, there’s a hand wheel, it is used to adjust the outlet width size. The adjusting process is that remove the setscrew first, then circumgyrate the hand wheel, after adjusting, tighten the setscrew again, the connection between pothook and spring at the down most of the swing jaw make the toggle mechanism and swing jaw not to work outside, and they are adjusted by nuts.

Teagasc suiteála

Cuirtear an meaisín ar fáil d'úsáideoirí tar éis ár monarcha monaraithe a chur le chéile go hiomlán, déan scrúdú air nuair a fhaigheann tú, chun deireadh a chur leis na lochtanna a d'fhéadfadh a bheith ann le linn iompair.
1.Díríonn sé go beogacht oibre mór, mar sin molaimid do na brúiteoirí jaw a chur ar na bunsraitheanna coincréite, chun creathanna agus torann a laghdú, is fearr leat temples crua -adhmaid, stiallacha rubair nó cushioning eile a chur faoi bhun - Ábhair bheogachta idir na crushers agus na bunsraitheanna coincréite.
2. Is é an meáchan bunsraith ná thart ar 5 - 10 n -uaire den mheáchan meaisín, tá an doimhneacht bhunúsach níos doimhne ná doimhneacht reo na talún san áit seo. Agus tú ag tabhairt faoi shuiteáil an mheaisín agus do shuíomh Terra Feet Bolts.
3. Sula ndéantar an méid leithead asraonta a choigeartú, ba chóir duit an t -earrach aimsir a scaoileadh ar dtús. Agus tar éis dó an chéim aimsir earraigh a choigeartú, chun an mheicníocht scorán a chosc ó bheith ag obair taobh amuigh.

Físeán táirge