Tábla gearrtha

Cur síos gairid:

6-S shaker belongs to gravity beneficiation equipment, developed from the plane chute, characterized by its asymmetric reciprocating motion and its own system. Suitable for sorting 2-0.037 mm ore and slime grade gold, tungsten, tin, tantalum, iron,manganese, chromium, titanium, bismuth, lead and other nonferrous, black, rare and precious metal minerals, sorting 4-0.037 mm pyrite; After changing the form of the bed bar properly, it can select the non-metal such as coal and coal slime, monazite, rutile, and other mixed materials with enough specific gravity difference and particle size composition.

Déan teagmháil anois íoslódáil

Sonraí Táirgí

Clibeanna Táirgí

Pictiúr táirge

Forbhreathnú táirge

The beneficiation process of the shaker is carried out on the inclined bed surface with repeated strips. The ore particles are sent from the feed trough at the corner of the bed surface, and the transverse washing water is supplied to the feed trough. Under the action of gravity, the transverse water impulse, the inertia and friction caused by the reciprocating asymmetric movement of the bed surface, the ore particles are stratified according to specific gravity and particle size. The longitudinal motion along the bed surface and the transverse motion along the inclined bed surface are made. Therefore, the ore particles with different specific gravity and particle size gradually fan down in their respective direction of movement, respectively from different areas of theconcentrate end and tailings side, and finally are divided into concentrate, ore and tailings.The outstanding advantage of 6-S shaker is that the separation accuracy is high, and the final concentrate, middle ore and waste tailings can be obtained after a single separation, and multiple products can be obtained at the same time. The concentration ratio of concentrate is high, the sorting efficiency is high, the care is easy, and the stroke is easy to adjust.

An Prionsabal Oibre

Shaker sorting is realized under the joint action of bed shaking and transverse water flow. Bed bed strips are longitudinal and the direction of water flow is close to vertical. When water flow crosses each bed strip laterally, eddy currents are formed in the groove. The combined action of eddy currents and bed shaking can loosen the mineral sand layer and stratify it according to density. The upper light ore particles are subject to the greater impulse of the water flow, while the lower heavy ore particles are subject to the lesser impulse, so the transverse movement speed of the light ore particles on the bed is greater than that of the heavy ore particles on the bed. This process is called "de lamination".

Sa treo fadaimseartha, ghluaiseann gluaiseacht dhifreálach dhromchla na leapa, ar dtús ar luas mall agus luasghéarú de réir a chéile, go dtí an t -uasluas nuair a laghdaíonn an cúlú tobann, an luas de réir a chéile le linn an phróisis cúlú, agus ansin ar aghaidh, déan an próiseas thuas a athdhéanamh, ní hamháin go gcuireann sé srathú scaoilte ar an tsraith níos mó ag an gcáithníní ag an am céanna agus go n -aistríonn an t -am ar aghaidh ag an gcáithníní soilse. Sa chás go dtéann na cáithníní méine ar an meascán de threoluas fadaimseartha agus treoluas trasnach. Tá treoluas trasnach níos lú ag mianraí troma agus treoluas fadaimseartha níos mó, agus tá treoluas trasnach níos mó ag mianraí éadroma agus treoluas fadaimseartha níos lú.

Applying the parallelogram rule to synthesize the longitudinal velocity and transverse velocity, it can be seen that the combined velocity of heavy minerals is inclined to the concentrate end of the shaker, light minerals are inclined to the tailings side of the shaker, and medium density particles are located between the two. This process is called "transport banding".Since the height of the bed is gradually reduced along the longitudinal direction of the self-driving end, the stratified ore particle groups in the groove are continuously stripped off during the movement to the concentrate end.

Déantar na mianraí éadroma i gciseal uachtarach an groove a bhaint den chéad uair agus iad a bhogadh go dtí an taobh eireaball feadh threo cothrománach dhromchla na leapa, agus scaoiltear na mianraí troma ón deireadh comhchruinnithe. Dá bhrí sin, taispeánann na mianraí ar dhromchla na leaba iomlán dáileadh lucht leanúna de réir domhantarraingthe éagsúla agus méid éagsúil na gcáithníní, chun éagsúlacht táirgí a fháil.

The concentrate strip is washed by transverse water flow in the smooth area of the bed surface (no bed strip area), so that a few gangue particles mixed in it are washed out, and the grade of the concentrate is further improved.

Físeán táirge